Epoch

Epoch 12V & 36V Onboard Marine Lithium Battery Charger

Regular Price
$349.00
Sale Price
$349.00
Regular Price
Sold Out
Unit Price
Translation missing: en.general.accessibility.unit_price_separator 
Shipping calculated at checkout.
American Express Mastercard Shop Pay Visa
Secure payments

Secure payments

100% Guarantee

100% Guarantee

Client satisfaction

Client satisfaction

Have a question?

Talk with a technical expert.

  • Description

Epoch 12V & 36V Onboard Marine Lithium Battery Charger – 2-Bank

The Epoch 12V and 36V onboard marine battery charger charges a 12V cranking or house battery and a native 36V LiFePO4 trolling-motor battery at the same time from a single AC plug. Its two independent banks (12V 15A and 36V 10A) replace separate chargers on bass boats and other mixed-voltage marine systems, and the IP67 epoxy-filled enclosure is made for permanent onboard installation. Explore more options in our lithium battery collection.

Key features

  • Two independent banks: Bank 1 delivers 12V at 15A, Bank 2 delivers 36V at 10A, and both can charge simultaneously.
  • Selectable 12V modes: LiFePO4, lead-acid or AGM via the front MODE button.
  • Dedicated 36V lithium output: for a compatible native 36V LiFePO4 battery.
  • Lithium BMS activation: hold the MODE button (12V bank) or the ACTIVATE button (36V bank) for about 3–5 seconds to wake a compatible sleeping lithium battery.
  • Automatic full-charge shutdown: LED indicators change from red (charging) to green (fully charged).
  • IP67 epoxy-filled construction: for correctly installed onboard marine environments.
  • Active cooling: aluminum housing, bottom cooling plate and a temperature-controlled waterproof fan.
  • Built-in protection: reverse-connection, short-circuit, no-load, overcharge and overtemperature protection.
  • Secure connections: pre-wired M8 ring terminals (red positive, black negative) and six mounting points.

One charger for a mixed-voltage boat

Many bass boats combine a 12V cranking or house battery with a native 36V lithium trolling-motor battery. This charger manages the two systems independently, so you plug in once instead of juggling two portable chargers and loose clips in the bilge. Each bank has its own charging logic, status display, battery leads and activation control.

Built for the marine environment

The enclosure is filled with epoxy resin for IP67 ingress protection when correctly installed. This is not a fanless charger: the aluminum housing and cooling plate work together with a temperature-controlled waterproof fan, so keep more than 30 mm of clearance around the charger and never block the cooling surfaces or the fan. Inspect cables, glands, seals, mounting points and the AC connection regularly, because IP67 does not make damaged wiring or an unsafe installation acceptable.

Battery compatibility

The 12V lead must go only to a compatible 12V battery in the correct selected mode, and the 36V lead only to a compatible single 36V LiFePO4 battery. The 36V output is published for a native 36V LiFePO4 battery, so do not assume it will correctly balance three separate 12V batteries wired in series; for that, follow the battery manufacturer's instructions or use a multi-bank 12V charger. Do not use the charger on unsupported voltages, dry-cell batteries, frozen batteries or damaged batteries. Do not charge LiFePO4 below 0°C (32°F) unless the battery has approved internal heating or its manufacturer permits it.

Technical specifications

Model / SKU CHG-2BAY-12V36V
Type Two-bank mixed-voltage onboard marine battery charger
AC input 105–125 VAC, 60 Hz, integrated grounded AC cord and plug
Bank 1 output 12 V / 15 A, selectable LiFePO4, lead-acid or AGM mode
Bank 2 output 36 V / 10 A, compatible 36V LiFePO4 battery only
Replacement fuses 20 A (12V bank), 15 A (36V bank)
Indicators LEDs for AC power, 12V battery type and charge status (red = charging, green = full)
Output connections M8 ring terminals (red positive, black negative)
Protection Short-circuit, reverse-connection, overcharge, overtemperature and no-load protection
Enclosure IP67, epoxy-filled, aluminum housing with bottom aluminum cooling plate
Cooling Temperature-controlled waterproof fan
Working temperature -20°C to 40°C (-4°F to 104°F)
Dimensions 274 × 245 × 99 mm (about 10.79 × 9.65 × 3.90 in)
Mounting 6.5 mm holes, M6 screws recommended, more than 30 mm clearance around the charger

Charging time

To estimate charging time, divide the battery's amp-hour capacity by the bank's output (15 A for the 12V bank, 10 A for the 36V bank), then allow additional time for charge tapering, balancing, temperature and battery condition. Never exceed the battery manufacturer's maximum charge-current limit.

Installation notes

Mount the charger on a rigid surface with the supplied mounting points and keep the leads, glands, indicators and fan accessible. Connect the red ring terminals to battery positive and the black ones to negative, route each lead to its labeled battery voltage, and protect the cables from abrasion. Confirm polarity, voltage, battery chemistry and battery temperature before connecting the grounded AC supply. The charger does not replace the boat's battery disconnects, branch fusing or DC circuit protection. Disconnect AC before servicing battery connections, keep adequate ventilation around the batteries and the charger, and use a correctly rated grounded marine or outdoor extension cord if needed. Use qualified marine-electrical help where required.

Need help choosing a charger or batteries for your boat? Browse the full battery collection at Crafts Cove Marine or contact us for advice.

Epoch 12V & 36V Onboard Marine Lithium Battery Charger

Epoch 12V & 36V Onboard Marine Lithium Battery Charger

$349.00